Specifications

set spantree portpri Configuring Spanning Tree Port Parameters
Enterasys Matrix N Standalone (NSA) Series Configuration Guide 6-55
Parameters
Defaults
•Ifport‐stringisnotspecified,portprioritywillbedisplayedforallSpanningTreeports.
•Ifsidisnotspecified,portprioritywillbedisplayedforSpanningTree0.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtodisplaytheportpriorityforfe.2.7:
Matrix(rw)->show spantree portpri port fe.2.7
Port fe.2.7 has a Port Priority of 128 on SID 0
set spantree portpri
Usethiscommandtosetaport’sSpanningTreepriority.
Syntax
set spantree portpri port-string priority [sid sid]
Parameters
Defaults
Ifsidisnotspecified,portprioritywillbesetforSpanningTree0.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtosetthepriorityoffe.1.3to240onSID1.
Matrix(rw)->set spantree portpri fe.1.3 240 sid 1:
portport‐string (Optional)Specifiestheport(s)forwhichtodisplaySpanningTree
priority.Foradetaileddescriptionofpossibleport‐stringvalues,referto
“PortStringSyntaxUsedintheCLI”onpage 4‐2.
sidsid (Optional)DisplaysportpriorityforaspecificSpanningTreeidentifier.
Validvaluesare0‐
4094.Ifnotspecified,SID0isassumed.
port‐string Specifiestheport(s)forwhichtosetSpanningTreeportpriority.Fora
detaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 4‐2.
priority SpecifiesanumberthatrepresentsthepriorityofalinkinaSpanning
Treebridge.Valid
valuesarefrom0to240(inincrement sof16)with0
indicatinghighpriority.
sidsid (Optional)SetsportpriorityforaspecificSpanningTreeidentifier.
Validvaluesare0‐4094.Ifnotspecified,SID0isassumed.