Specifications

Configuring Spanning Tree Bridge Parameters clear spantree mstmap
6-16 Spanning Tree Configuration
Example
ThisexampleshowshowtomapFID3toSID2:
Matrix(rw)->set spantree mstmap 3 sid 2
clear spantree mstmap
UsethiscommandtomapaFIDbacktoSID0.
Syntax
clear spantree mstmap fid
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtomapFID2backtoSID0:
Matrix(rw)->clear spantree mstmap 2
show spantree vlanlist
UsethiscommandtodisplaytheVLANID(s)assignedtooneormoreSpanningTrees.
Syntax
show spantree vlanlist [vlan-list]
Parameters
Defaults
Ifnotspecified,SIDassignmentwillbedisplayedonlyforVLANsassignedtoanySIDotherthan
SID0.
Mode
Switchcommand,Read‐Only.
fid SpecifiesoneormoreFIDstoresetto0.
vlan‐list (Optional)DisplaysinformationforspecificVLAN(s).