Specifications

show spantree version Configuring Spanning Tree Bridge Parameters
Enterasys Matrix N Standalone (NSA) Series Configuration Guide 6-9
show spantree version
UsethiscommandtodisplaythecurrentversionoftheSpanningTreeprotocolrunningonthe
device.
Syntax
show spantree version
Parameters
None.
Defaults
None.
Mode
Switchcommand,ReadOnly.
Example
ThisexampleshowshowtodisplaySpanningTreeversioninformationforthedevice:
Matrix(rw)->show spantree version
Force Version is mstp
set spantree version
UsethiscommandtosettheversionoftheSpanningTreeprotocoltoMSTP(MultipleSpanning
TreeProtocol),RSTP(RapidSp anningTreeProtocol)ortoSTP802.1Dcompatible.
Syntax
set spantree version {mstp | stpcompatible | rstp}
Parameters
Defaults
None.
Mode
Switchcommand,ReadWrite.
Usage
Inmostnetworks,SpanningTreeversionshouldnotbechangedfromitsdefaultsettingofmstp
(MultipleSpanningTreeProtocol)mode.MSTPmodeisfullycompatibleandinteroperablewith
legacySTP802.1DandRapidSpanningTree(RSTP)bridges.Settingtheversiontostpcompatible
mstp SetstheversiontoSTP802.1scompatible.
stpcompatible
SetstheversiontoSTP802.1Dcompatible.
rstp Setstheversionto802.1wcompatible.