Specifications

show snmp group Configuring SNMP Users, Groups and Communities
Enterasys Matrix N Standalone (NSA) Series Configuration Guide 5-13
Defaults
Ifremoteisnotspecified,theuserwillberemovedfromthelocalSNMPengine.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoremovetheSNMPusernamed“bill”:
Matrix(rw)->clear snmp user bill
show snmp group
UsethiscommandtodisplayanSNMPgroupconfiguration.AnSNMPgroupisacollectionof
SNMPv3userswhosharethesameaccessprivileges.
Syntax
show snmp group [ groupname groupname] [user user] [security-model { v1 | v2c | usm}]
[volatile | nonvolatile | read-only]
Parameters
Defaults
•Ifgroupnameisnotspecified,informationaboutallSNMPgroupswillbedisplayed.
•Ifuserisnotspecified,informationaboutallSNMPuserswillbedisplayed.
•Ifsecurity‐modelisnotspecified,userinformationaboutallSNMPversionswillbe
displayed.
•Ifnotspecified,informationforallstoragetypeswillbedisplayed.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplaySNMPgroupinformation:
Matrix(rw)->show snmp group
--- SNMP group information ---
Security model = SNMPv1
Security/user name = public
Group name = Anyone
groupnamegroupname (Optional)DisplaysinformationforaspecificSNMPgroup.
useruser (Optional)Displaysinformationaboutuserswithinthespecifiedgroup.
security‐modelv1|
v2c|usm
(Optional)Displaysinformationaboutgroupsassignedtoasp ecific
securitySNMPmodel.
volatile|nonvolatile
|read‐only
(Optional)DisplaysSNMPgroupinformationforaspecified
storage
type.