Specifications

Configuring LACP show lacp flowRegeneration
4-70 Port Configuration
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoclearalllinkaggregationparametersforportge.3.16:
Matrix(rw)->clear port lacp port ge.3.16
show lacp flowRegeneration
UsethiscommandtodisplaytheLACPflowregenerationstate.
Syntax
show lacp flowRegeneration
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplaythecurrentLACPflowregenerationstate:
Matrix(rw)->show lacp flowRegeneration
disable
set lacp flowRegeneration
UsethiscommandtoenableordisableLACPflowregeneration.
Syntax
set lacp flowRegeneration {enable | disable}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
enable|disable EnablesordisablesLACPflowregeneration