Specifications

set lacp static Configuring LACP
Enterasys Matrix N Standalone (NSA) Series Configuration Guide 4-63
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtocleartheactor adminkeyforLAGport48:
Matrix(rw)->clear lacp aadminkey lag.0.484
set lacp static
SyntaxUsethiscommandtoassignoneormoreunderlyingphysicalportstoaLinkAggregation
Group(LAG).
setlacpstaticlagportstring[key]port‐string
Parameters
Defaults
Ifnotspecified,akeywillbeassignedaccordingtothespecifiedaggregator.Forexampleakeyof4
wouldbeassignedtolag.0.4.
Mode
Switchcommand,Read‐Write.
Usage
AtleasttwoportsneedtobeassignedtoaLAGportforaLinkAggregationGrouptoformand
attachtothespecifiedLAGport.
ThesameusageconsiderationsfordynamicLAGsdiscussedin“MatrixSeriesUsage
Considerations”onpage 4‐57applytostaticallycreatedLAGs.
StaticLAGconfigurationshould
beperformedbypersonnelwhoareknowledgeableaboutLink
Aggregation.MisconfigurationcanresultinLAGsnotbeingformed,orinportsattachingtothe
wrongLAGport,affectingpropernetworkoperation.
lagportstring SpecifiestheLAGaggregatorporttowhichnewportswillbeassigned.
key (Optional)Specifiesthenewmemberportand
LAGportaggregator
adminkeyvalue.Onlyportswithmatchingkeysareallowedto
aggregate.Validvaluesare0‐65535.
Note: This key value must be unique. If ports other than the desired underlying
physical ports share the same admin key value, aggregation will fail or
undesired aggregations will form.
port‐string Specifiesthememberport(s)toaddtotheLAG.Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntax
UsedintheCLI”onpage 4 ‐2.