Specifications

Configuring Link Traps and Link Flap Detection set linkflap downtime
4-46 Port Configuration
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Examples
Thisexampleshowshowtosetthelinkflapthresholdonportfe.1.4to5:
Matrix(rw)->set linkflap threshold fe.1.4 5
set linkflap downtime
Usethiscommandtosetthetimeinterval(inseconds)oneormoreportswillbehelddownaftera
linkflapviolation.
Syntax
set linkflap downtime port-string downtime_value
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Examples
Thisexampleshowshowtosetthelinkflapdowntimeonportfe.1.4to5000seconds:
Matrix(rw)->set linkflap downtime fe.1.4 5000
port‐string Specifiestheport(s)onwhichtosetthelinkflapactiontriggercount.
Foradetaileddescriptionofpossibleport‐stringvalues,referto“Port
StringSyntaxUsedintheCLI”onpage 4‐2.
threshold_value Specifiesthenumberoflinkdowntransitionsnecessarytotriggerthe
linkflapaction.
port‐string Specifiestheport(s)onwhichtosetthelinkflapdowntime.Fora
detaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 4‐2.
downtime_value Specifiesadowntimeinseconds.Avalueof0willsetthedowntimeto
forever.