Specifications

clear linkflap action Configuring Link Traps and Link Flap Detection
Enterasys Matrix N Standalone (NSA) Series Configuration Guide 4-45
Mode
Switchcommand,Read‐Write.
Examples
Thisexampleshowshowtosetthelinkflapviolationactiononportfe.1.4togeneratingaSyslog
entry:
Matrix(rw)->set linkflap action fe.1.4 gensyslogentry
clear linkflap action
Usethiscommandtoclearreactionstoalinkflapviolation.
Syntax
clear linkflap action [port-string} {disableInterface | gensyslogentry | gentrap
| all}
Parameters
Defaults
Ifport‐stringisnotspecified,actionswillbeclearedonallports.
Mode
Switchcommand,Read‐Write.
Examples
Thisexampleshowshowtoclearalllinkflapviolationactionsonallports:
Matrix(rw)->clear linkflap action all
set linkflap threshold
Usethiscommandtosetthelinkflapactiontriggercount.
Syntax
set linkflap threshold port-string threshold_value
port‐string (Optional)Specifiestheport(s)onwhichtoclearthelinkflapaction.For
adetaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 4‐2.
disableInterface|
gensyslogentry|
gentrap|all
Clearsthereactionof:
•Disablingtheinterface
• GeneratingaSyslog
entry
• GeneratinganSNMPtrapmessage,or
•Alloftheabove.