Specifications

set port advertise Setting Auto-Negotiation and Advertised Ability
Enterasys Matrix N Standalone (NSA) Series Configuration Guide 4-35
set port advertise
Usethiscommandtoenableordisableandtoconfiguretheadvertisedabilityononeormore
ports.
Syntax
set port advertise port-string [10t] [10tfd] [100tx] [100txfd] [1000x] [1000xfd]
[1000t] [1000tfd] [pause] [apause] [spause] [bpause]
Parameters
Defaults
Atleastoneoptionalparametermustbespecified.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtosetfe.3.4toadvertise100BASE‐TXfullduplexoperation:
Matrix(rw)->set port advertise fe.3.4 100txfd
clear port advertise
Usethiscommandtoresetadvertisedabilitytothedefaultsettingononeormoreports.
Syntax
clear port advertise port-string [10t | 10tfd | 100tx | 100txfd | 1000x | 1000txfd
| 1000t | 1000tfd | pause | apause | spause | bpause]
port-string
Specifiestheport(s)forwhichtosetadvertisedability.Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntax
UsedintheCLI”onpage 4 ‐2.
10t (Optional)Advertises10BASE‐Thalfduplexmode.
10tfd (Optional)Advertises10BASE‐Tfullduplexmode.
100tx (Optional)Advertises100BASE‐TXhalf
duplexmode.
100txfd (Optional)Advertises100BASE‐TXfullduplexmode.
1000x (Optional)Advertises1000BASE‐X,‐LX,‐SX,‐CXhalfduplexmode.
1000xfd (Optional)Advertises1000BASE‐X,‐LX,‐SX,‐CXfullduplexmode.
1000t (Optional)Advertises1000BASE‐Thalf duplexmode.
1000tfd (Optional)Advertises1000BASE‐Tfullduplexmode.
pause (Optional)AdvertisesPAUSEforfull‐duplex
links.
apause (Optional)AdvertisesasymmetricPAUSEforfull‐duplexlinks.
spause (Optional)AdvertisessymmetricPAUSEforfull‐duplexlinks.
bpause (Optional)AdvertisesasymmetricandsymmetricPAUSEforfull‐
duplexlinks