Specifications

Reviewing Port Status show port status
4-14 Port Configuration
show port status
Usethiscommandtodisplayoperatingandadminstatus,speed,duplexmodeandporttypefor
oneormoreportsonthedevice.
Syntax
show port status [port-string] [-interesting]
Parameters
Defaults
Ifnooptionsarespecified,status information forallportswillbedisplayed.
Mode
Switchcommand,Read‐Only.
Examples
Thisexampleshowshowtodisplaystatusinformationforportge.3.1through4:
Matrix(rw)->show port status ge.3.1-4
Port Alias Oper Admin Speed Duplex Type
(truncated) Status Status
------------ -------------- ------- ------- -------- ------- -------------
ge.3.14 up up 1 Gbps full 1000-SX MT-RJ
Table 4‐1providesanexplana tion ofthecommandoutput.
port‐string (Optional)Displaysstatusforspecificport(s).Foradetaileddescription
ofpossibleport‐stringvalues,referto“PortStringSyntaxUsedinthe
CLI”onpage 4‐2.
‐interesting (Optional)Displaysonlyportswithanoperationalstatusofupor
dormant.
Table 4-1 show port status Output Details
Output... What it displays...
Port Port designation. For a detailed description of possible port-string
values, refer to “Port String Syntax Used in the CLI” on page 4-2.
Alias (truncated) Alias configured for the port. For details on using the set port alias
command, refer to “show port alias” on page 4-21.
Oper Status Operating status (up or down).
Admin Status Whether the specified port is enabled (up) or disabled (down). For
details on using the set port disable command to change the default
port status of enabled, refer to “set port disable” on page 4-20. For
details on using the set port enable command to re-enable ports, refer
to “set port enable” on page 4-21.
Speed Operational speed in Mbps or Kbps of the specified port. For details on
using the set port speed command to change defaults, refer to “set
port speed” on page 4-25.