Specifications

Setting Console Port Properties set console stopbits
4-10 Port Configuration
set console stopbits
Usethiscommandtosetthestopbitspercharacterforoneormoreconsoleports.
Syntax
set console stopbits {one | oneandhalf | two} [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,stopbitspercharacterwillbesetforallconsoleports.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtosetstopbitspercharacterto2forconsoleportcom.1.1:
Matrix(rw)->set console stopbits 2 com.1.1
clear console stopbits
Usethiscommandtoclearthestopbitspercharacterforoneormoreconsoleports.
Syntax
clear console stopbits [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,stopbitspercharacterwillbeclearedforallconsoleports.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoclearstopbitspercharacterforconsoleportcom.1.1:
Matrix(rw)->clear console stopbits com.1.1
one|oneandhalf|
two
Setsstopbitspercharacterto1,1.5or2.
port‐string (Optional)Setsstopbitsforspecificconsoleport(s).
port‐string (Optional)Clearsstopbitsforspecificconsoleport(s).