Specifications

set console flowcontrol Setting Console Port Properties
Enterasys Matrix N Standalone (NSA) Series Configuration Guide 4-7
set console flowcontrol
Usethiscommandtosetthetypeofflowcontrolforoneormoreconsoleports.
Syntax
set console flowcontrol {none | ctsrts | dsrdtr} [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,flowcontrolwillbesetforallconsoleports.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoenableDSR/DTRflowcontrolforconsoleportcom.1.1:
Matrix(rw)->set console flowcontrol dsrdtr com.1.1
clear console flowcontrol
Usethiscommandtoclearthetypeofflowcontrolforoneormoreconsoleports.
Syntax
clear console flowcontrol [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,flowcontrolwillbeclearedforallconsoleports.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoclearflow controlforconsoleportcom.1.1:
Matrix(rw)->clear console flowcontrol com.1.1
none Disablesallhardwareflowcontrol.
ctsrts EnablesCTS/RTS(Cle artoSend/RequesttoSend)hardwareflow
control.
dsrdtr EnablesDSR/DTR(Data SetReady/DataTerminalReady)hardware
flowcontrol.
port‐string (Optional)Setsflowcontrolforspecificconsoleport(s).
port‐string (Optional)Clearsflowcontrolforspecificconsoleport(s).