Specifications

Link Layer Discovery Protocol and LLDP-MED clear lldp
3-34 Discovery Protocols Configuration
clear lldp
UsethiscommandtoreturnLLDPparameterstotheirdefaultvalues.
Syntax
clear lldp {all | tx-interval | hold-multipler | trap-interval | med-fast-repeat}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Examples
Thisexamplereturnsthetransmitintervaltothedefaultvalueof30seconds.
Matrix(rw)->clear lldp tx-interval
clear lldp port status
Usethiscommandtoreturntheportstatustothedefaultvalueofboth(bothtransmittingand
processingreceivedLLDPDUsareenabled).
Syntax
clear lldp port status port-string
Parameters
Defaults
None.
Mode
Switchcommand,Read‐write.
all ReturnsallLLDPconfigurationparameterstotheirdefaultvalues,
includingportLLDPconfigurationparameters.
tx‐interval ReturnsthenumberofsecondsbetweentransmissionsofLLDP
frames.tothedefaultof30seconds.
hold‐multiplier Returnsthemultipliertoapplytothetransmitintervaltodeterminethe
time‐to‐livevalue
tothedefaultvalueof4.
trap‐interval ReturnstheminimumtimebetweenLLSPtraptransmissionstothe
defaultvalueof5seconds.
med‐fast‐repeat ReturnsthenumberoffaststartLLDPDUstobesentwhenanLLDP‐
MEDendpointdeviceisdetectedtothedefaultof3.
port-string
Specifiestheportorrangeofportstobeaffected.