Specifications

Link Layer Discovery Protocol and LLDP-MED set lldp port network-policy
3-32 Discovery Protocols Configuration
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleconfiguresthemanagementaddress,MEDcapability,MEDnetworkpolicy,and
MEDlocationidentificationTLVstobesentinLLDPDUsbyportge.1.1.
Matrix(rw)->set lldp port tx-tlv mgmt-addr med-cap med-pol med-loc ge.1.1
set lldp port network-policy
Usethiscommandtoconfigurenetworkpolicyforasetofapplicationsonaportorrangeofports.
Syntax
set lldp port network-policy {all | voice | voice-signaling | guest-voice |
guest-voice-signaling | softphone-voice | video-conferencing | streaming-video |
video-signaling} [state {enable | disable}] [ tag {tagged | untagged}]
[vid {vlan-id | dot1p}] [cos cos-value] [dscp dscp-value] port-string
Parameters
med‐poe LLDP‐MEDExtendedPowerviaMDITLV.Valuessentincludethe
PowerLimit(totalpowertheportiscapableofsourcingovera
maximumlengthcable)andthepowerpriorityconfiguredontheport.
OnlyvalidforPoE‐enabled ports.
port-string
Specifiestheportorrangeofportstobeaffected.
all Configuresallapplications.
voice Configuresthevoiceapplication.
voice‐signaling Configuresthevoicesignalingapplication.
This application will not be advertised if the voice application is
configured with the same parameters.
guest‐voice Configurestheguestvoiceapplication.
guest‐voice‐signaling Configurestheguestvoicesignalingapplication.
This application will not be advertised if the guest-voice application is
configured with the same parameters.
softphone‐voice Configuresthesoftphonevoiceapplication.
video‐conferencing Configuresthevideoconferencingapplication.
streaming‐video Configuresthestreamingvideoapplication.
video‐signaling Configuresthevideosignalingapplication.
This application will not be advertised if the video-conferencing
application is configured with the same parameters.