Specifications

Reviewing and Configuring Routing router
2-92 Startup and General Configuration
Router Configuration
Mode
Set IP protocol
parameters.
Type router and the
protocol name (and, for
OSPF, the instance ID)
from Global or Interface
Configuration mode.
Matrix>router
(config-router)#
Key Chain
Configuration Mode
Set protocol (RIP)
authentication key
parameters.
Type key chain and the
key chain name
from
Router (RIP)
Configuration mode.
Matrix>router
(config-keychain)#
Key Chain Key
Configuration Mode
Configure a specific
key within a RIP
authentication key
chain.
Type key
and the key-id
from Key Chain
Configuration Mode.
Matrix>router
(config-keychain-key)#
Route Map
Configuration Mode
Configure route maps
1-99.
Type route-map, an id-
number, and permit or
deny from Global
Configuration Mode.
Matrix>router
(config-route-map)#
Policy-Based
Routing
Configuration Mode
Configure policy-based
routing for route maps
100-199.
Type route-map, an id-
number, and permit or
deny from Global
Configuration Mode.
Matrix>router
(config-route-map-pbr)#
Server Load
Balancing (SLB)
Server Farm
Configuration Mode
Configure an LSNAT
server farm.
Type ip slb serverfarm
and the serverfarmname
from Global
Configuration Mode.
Matrix>router
(config-slb-sfarm)#
Server Load
Balancing (SLB)
Real Server
Configuration Mode
Configure an LSNAT
real server.
Type real and the real
server IP address from
SLB Server Farm
Configuration Mode.
Matrix>router
(config-slb-real)#
Server Load
Balancing (SLB)
Virtual Server
Configuration Mode
Configure an LSNAT
virtual server.
Type ip slb vserver and
the vserver-name from
Global Configuration
Mode.
Matrix>router
(config-slb-vserver)#
IP Local Pool
Configuration Mode
Configure a local
address pool as a
DHCP subnet
Type ip local pool and
the local pool name from
Global Configuration
Mode.
Matrix>router
(ip-local-pool)#
DHCP Pool
Configuration Mode
Configure a DHCP
server address pool.
Type ip dhcp pool and
the address pool name
from Global
Configuration Mode.
Matrix>router
(config-dhcp-pool)#
DHCP Class
Configuration Mode
Configure a DHCP
client class.
Type client-class and
the client class name
from DHCP Pool or Host
Configuration Mode.
Matrix>router
(config-dhcp-class)#
Table 2-9 Router CLI Configuration Modes (continued)
Use this mode... To... Access method... Resulting Prompt...