Specifications

Gathering Technical Support Information show support
2-86 Startup and General Configuration
Gathering Technical Support Information
Purpose
Togathercommontechnicalsupportinformation.
Command
show support
Usethiscommandtodisplayoutputfortechnicalsupport‐relatedcommands.
Syntax
show support [filename]
Parameters
Defaults
Thefollowingcommandsareexecuted:
• showversion(“showversion”onpage 2‐48)
• showsystemhardware(“showsystemhardware”onpage 2‐35)
• showvlan(“showvlan”onpage 7‐3)
• showvlanstatic(“showvlan”onpage 7‐3)
• showloggingall(“showloggingall”onpage 10‐2)
• showsnmpcounters(“
showsnmpcounters”onpage 5‐6)
• showportstatus(“showportstatus”onpage 4‐14)
• showspantreestatus(“showspantreestats”onpage 6‐6)
• showspantreeblockedports(“showspantreeblockedports”onpage 6‐54)
• showipaddress(“showipaddress”onpage 2‐31 )
• showiproute(“showiproute”
onpage 10‐60)
• shownetstat(“shownetstat”onpage 10‐17)
• showarp(“showarp”onpage 10‐57)
• showsystemutilization(“showsys tem utilization”onpage 2‐37)
• showconfig(“showconfig”onpage 2‐73)
Mode
Switchcommand,Read‐Only.
For information about... Refer to page...
show support 2-86
filename(Optional)Filename(slotN/name)tosaveoutput.