Specifications

exit | quit Pausing, Clearing and Closing the CLI
Enterasys Matrix N Standalone (NSA) Series Configuration Guide 2-81
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtocleartheCLIscreen:
Matrix(rw)->cls
exit | quit
UseeitherofthesecommandstoleaveaCLIsession.
Syntax
exit
quit
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
Usage
Bydefault,devicetimeoutoccursafter15minutesofuserinactivity,automaticallyclosingyour
CLIsession.Usethesetlogoutcommandasdescribedin“setlogout”onpage 2 ‐53tochangethis
default.
Whenoperatinginroutermode,theexitcommandjumpstoalowerconfigurationlevel.For
detailson
enablingrouterconfigurationmodes,referto“EnablingRouterConfigurationModes”
onpage 2‐91.
Example
ThisexampleshowshowtoexitaCLIsession:
Matrix(rw)->exit