Specifications

Managing Configuration and Image Files configure
2-74 Startup and General Configuration
configure
Usethiscommandtoexecuteapreviouslydownloadedconfigurationfilestoredonthedevice.
Syntax
configure filename [append]
Parameters
Defaults
Ifappendisnotspecified,thecurrentrunningconfigurationwillbereplacedwiththecontentsof
theconfigurationfile,whichwillrequireanautomatedresetofthechassis.
Mode
Switch,Read‐Write.
Example
Thisexampleshowshowtoexecutethe“myconfig ” fileinthemoduleinslot1:
Matrix(rw)->configure slot1/myconfig
copy
UsethiscommandtouploadordownloadanimageoraCLIconfigurationfile.
Syntax
copy source destination
Parameters
Defaults
None.
Mode
Switch,Read‐Write.
filename Specifiesthepathandfilenameoftheconfigurationfiletoexecute.
append (Optional)Executestheconfigurationasanappendagetothecurrent
configuration.Thisisequivalenttotypingthecontentsoftheconfigfile
directlyintotheCLIandcanbeused,forexample,tomakeincremental
adjustmentstothecurrentconfiguration.
source
Specifieslocationandnameofthesourcefiletocopy.Optionsarea
localfilepath(v aliddirectoriesare/imagesand/slotN),ortheURLof
anFTPorTFTPserver.
destination
Specifieslocationandnameofthedestinationwherethefilewillbe
copied.Optionsareaslotlocationandfilename,ortheURLofanFTP
orTFTPserver.