Datasheet

MGBIC Features
MGBIC Power
Notes: The maximum drive distance depends on the quality of the installed fiber-optic cable segment. Use the Link
Power Budget to calculate the maximum cable length of the attached segment. The Link Power Budget must not
exceed those specified in this table. The input power must not exceed the maximum stated. Otherwise, saturation could
occur.
Page 2 of 4 • Data Sheet
Specifications
Mini GBIC Ethernet Cable Cable Type Maximum Wavelength Connector
Distance
MGBIC-02 1000Base-T Copper CAT-5 100 m N/A RJ45
MGBIC-08 1000Base-LX/LH Single Mode 9 or 10 µm 70 Km 1550 nm LC Connector
Fiber SMF wavelength
MGBIC-LC01 1000Base-SX Multimode 50/125 or 2-550 m 850 nm LC Connector
Fiber 62.5/125 µm MMF wavelength
MGBIC-LC03 1000Base-SX Multimode 50/125 or 2 Km 1310 nm LC Connector
Fiber 62.5/125 µm MMF wavelength
MGBIC-LC09 1000Base-LX Multimode 50 or 62.5 µm 2-550 m 1310 nm LC Connector
or Single Mode MMF, 9 or 10 (MMF) 2m- wavelength
Fiber µm SMF 10 Km (SMF)
MGBIC-MT01 1000Base-SX Multimode 50/125 or 62.5/125 2-550 m 850 nm MTRJ Connector
Fiber µm MMF wavelength
Mini GBIC Maximum Input Transmit Power Receive Link Power
Power Sensitivity Budget
MGBIC-02 N/A N/A N/A N/A
MGBIC-08 -3 dBm 0 dBm, minimum -24 dBm, minimum 23 dB
+2 dBm, typical -26 dBm, typical 28 dB typical
+5 dBm, maximum
MGBIC-LC01 0 dBm -9.5 dBm minimum -17 dBm 7.5 dB
MGBIC-LC03 -3 dBm -9.5 dBm, minimum -20 dBm, minimum 10.5 dB, minimum
-3 dBm, maximum -3 dBm, maximum
MGBIC-LC09 -3 dBm -9.5 dBm (SMF) -20 dBm 10.5 dB (SMF)
-11.5 dBm (MMF) 8.5 dB (MMF)
MGBIC-MT01 0 dBm -9.5 dBm minimum -17 dBm 7.5 dB
16478.9013222-2_ExpMod.DS.qxd 9/27/04 11:24 AM Page 2