Installation guide

Memory Replacement Procedures

B-8 Mode Switch Settings and Installing Options

Installing the DIMM

ToinstallaDIMM,refertoFigure B‐7andproceedasfollows:

1. PushtheconnectorarmsawayfromtheDIMMenoughtoinserttheDIMMintothe

connectorcontacts.

2. InserttheDIMMstraightdownbetweentheconnectorcontactsenoughforthetabs

ontheconnectorarmstoalignwiththetwoDIMM

alignmentnotches.

3. PushtheDIMMdownintotheconnectorcontacts.Thenrotatethetwoconnector

armstowardtheDIMMtolockitintoplace.

4. ThiscompletestheinstallationoftheDIMM.

Figure B-7 Installing the DIMM

Caution: Observe all Electrostatic Discharge (ESD) precautions when handling sensitive

electronic equipment.

Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones

de seguridad para evitar descargas de electricidad estática.

1 DIMM Connector arms 3 Connector contacts

2 DIMM 4 DIMM alignment notches (2)