Installation guide

Memory Replacement Procedures

Matrix DFE-Platinum Series Installation Guide B-7

DIMM Replacement Procedure

UnliketheDRAMSIMM,theEthernetinterfacemoduledoesnotneedtoberemovedto

accesstheDIMM.

Removing the DIMM

ToremovetheexistingDIMM,proceedasfollows:

1. LocatetheDIMMconnectoronthemainPCboard.ReferbacktoFigure B‐2.

2. PushtheconnectorarmsawayfromtheDIMM,asshowninFigure B‐6,enoughto

releasetheDIMMfromtheconnectorcontacts.

3. PulltheDIMMstraightupandremove

itfromtheconnectorcontacts.

Figure B-6 Removing the Existing DIMM

Caution: Observe all Electrostatic Discharge (ESD) precautions when handling sensitive

electronic equipment.

Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones

de seguridad para evitar descargas de electricidad estática.

1 Connector arms 2 DIMM 3 Connector contacts