Installation guide

Completing the Installation
3-32 Installation
Completing the Installation
CompletingtheDFEmoduleinstallationdependsonifthemoduleisbeinginstalledin
•anewDFEmodulesystem(referto“CompletingtheInstallationofaNewSystem”on
page 3‐32),or
•anestablished,operatingDFEmodulesystem(referto“CompletingtheInstallationof
aDFEModuleinanExisting
System”onpage 3‐34).
Completing the Installation of a New System
InanewsystemofDFEmodules,oneoftheinstalledDFEmoduleswillbecomethe
managementmoduleonchassispowerup,andallDFEmoduleswillautomaticallybeset
tothefactorydefaultvalues.Acompletelistofthefactorydefaultvaluesareprovidedin
Chapter3oftheMatrix
DFE‐PlatinumSeriesConfigurationGuide.
AfterinstallingallDFE modulesintothehostchassisandmakingtheconnectionstothe
network,proceedtothefollowingFirst‐TimeLog‐InUsingaConsolePortConnection
proceduretoaccessthemodulemanagementstartupscreenfromyourPC,terminal,or
modemconnection.
Modem Port Adapter Wiring and Signal Diagram
RJ45 DB25
Pin Conductor Pin Signal
1 Blue 2 Transmit (TX)
2 Orange 8 Data Carrier Detect (DCD)
4 Red 3 Receive
5 Green 7 Ground (GRD)
6 Yellow 20 Data Terminal Ready (DTR)
8 Gray 22 Ring Indicator
RJ45 Connector (Female)
Pins
81
045905
RJ45 Connector (Female)
81
Pins
DB25 Connector (Male)
131
Pins
14 25