Installation guide

Connecting to the Network
Matrix DFE-Platinum Series Installation Guide 3-25
Figure 3-16 Cable Connection to LC Fiber-Optic Connectors
3. Plugtheotherendofthecableintotheappropriateportontheotherdevice.Some
cablesmaybeterminatedattheother endwithtwoseparateconnectors,oneforeach
fiber‐opticstrand.Inthiscase,ensurethatthetransmitfiber‐opticstrandisconnected
tothereceiveport
andthereceivefiber‐opticstrandtothetransmitport.
4. VerifythatalinkexistsbycheckingthattheportRXLEDison(flashingamber,
blinkinggreen,orsolidgreen).
1 Installed Mini-GBIC LC connector 4 Port 6 Receive LED (RX)
2 LC cable connector 5 Port 6 Transmit LED (TX)
3 Release tab
1
2
3
4
5
6
1
2
3
4
5
6
7G-6MGBIC-A
Á
Ã
Ä
À
Â