Installation guide

Matrix DFE-Platinum Series Installation Guide 3-1
3
Installation
Thischapterprovidestheinstructionstoinstallthe7G4280‐19DFE moduleandan
optionalinterfacemodule7G‐6MGBICor7G‐6MGBIC‐A.Followtheorderofthesections
listedbelowtocorrectlyinstalltheDFE module.
Required Tools
Toolsneededtoinstallthe7G4280‐19andoptionsinclude:
• Phillipsscrewdriver
•Flatbladescrewdriver
For information about... Refer to page...
Required Tools 3-1
Unpacking the DFE Module 3-2
Installing Optional Ethernet Interface Module 3-2
Installing Optional Mini-GBICs 3-5
Backplane Connections and Installation Rules 3-8
Installing 7G4280-19 in Matrix E7, N5, or N7 Chassis 3-12
Installing 7G4280-19 in Matrix N3 or N1 Chassis 3-15
Connecting to the Network 3-16
Connecting to COM Port for Local Management 3-26
Completing the Installation 3-32