Installation guide

Environmental Requirements
Specifications and Regulatory Compliance A-3
A.4 ENVIRONMENTAL REQUIREMENTS
The environmental requirements for the Matrix N3 7C103 chassis, 7C203-1 power supply module,
and 7C403 fan tray are as follows:
A.5 REGULATORY COMPLIANCE
This equipment meets the following safety and electromagnetic compatibility (EMC)
requirements:
8 – 32 4.5 17.10 18.0 18.90 2
10 – 32 5 30.40 32.0 33.60 2
1/4 – 20 6.5 63.65 67.0 70.35 3
Item Specification
Operating Temperature: 5°C to 40°C (41°F to 104°F)
Storage Temperature: -30°C to 73°C (-22°F to 164°F)
Operating Relative Humidity: 5% to 90% (non-condensing)
Item Specification
Safety: UL 60950, CSA C22.2 No. 60950, 73/23/EEC, EN
60950, IEC 60950
Modules which support laser connections also meet the
EN 60825 and 21 CFR 1040.10 standards.
Electromagnetic Compatibility (EMC) FCC: 47 CFR Parts 2 and 15, CSA C108.8, 89/336/EEC, EN
55022, EN 61000-3-2, EN 61000-3-3, EN 55024,
AS/NZS CISPR 22, VCCI V-3
Table A-1 Recommended Torque Values by Screw Size (Continued)
Screw Size Torque in Pounds Bit Size