Installation guide

LANVIEW LEDs

Installation Requirements and Guidelines 2-3

2.3 LANVIEW LEDs

The following sections describe the LANVIEW

LED indications for the following:

• 7C203-1 power supply modules

• 7C403 fan assembly

2.3.1 Power Supply LEDs

There are two status LEDs on the power supply. Refer to Figure 2-1 for the location of the power

supply LEDs. Table 2-1 describes the different states of the power supply LEDs under six different

conditions. The power supplies are installed in chassis slots PS1 and PS2 in the front-bottom part

of the chassis.

Figure 2-1 7C203-1 Power Supply LEDs

1 7C203-1 power supply front panel 3 Power (PWR) supply status LED

2 Power REDUNDANCY status LED

7C203-1

REDUNDANCY

PWR