Installation guide

Using LANVIEW
Troubleshooting 4-3
RX
(Receive)
Off No link.
No activity or port in
standby. Port enabled or
disabled.
None.
Green Solid. Link, port enabled,
no activity.
None.
Blinking. Link, port
disabled.
None.
Amber Flashing. Link, port
enabled, activity.
None.
Red Solid. Diagnostic failure. Contact Enterasys Networks for assistance.
TX
(Transmit)
Off No activity. Ensure that the Spanning Tree Algorithm
(STA) is enabled and that there is a valid
link.
Green Flashing. Indicates
activity. Rate indicates
data rate. Port enabled.
None.
Amber Blinking. Port in
standby.
Ensure that the port is not disabled.
Red Flashing. Indicates
collision rate.
None.
Solid. Diagnostic failure. Contact Enterasys Networks for technical
support.
Table 4-1 LANVIEW LEDs (Continued)
LED Color State Recommended Action