Installation guide

Structure of This Guide
xiv About This Guide
STRUCTURE OF THIS GUIDE
This guide is organized as follows:
Chapter 1, Introduction, provides an overview of the modules and their features.
Chapter 2, Network Requirements, outlines the network requirements that must be met before
installing the module.
Chapter 3, Installation, provides instructions on how to install the module and connect segments
to the module.
Chapter 4, Troubleshooting, describes the function of the LANVIEW LEDs, which can help to
quickly diagnose network/operational problems.
Appendix A, Specifications, contains information on functionality and operating specifications,
connector pinouts, environmental requirements, and physical properties.
Appendix B, Mode Switch Bank Settings and Options, describes how to set the Mode Switch,
and install the optional FLASH module upgrade.
Appendix C, GPIM Specifications, lists the operating specifications and regulatory compliance
for the GPIMs.
RELATED DOCUMENTS
The following Enterasys Networks documents may help to set up and manage the module:
• Matrix E7 Series and SmartSwitch 6000 Series Modules Local Management User’s Guide
• Matrix E7 Overview and Setup Guide
• 6C105 SmartSwitch 6000 Overview and Setup Guide
• Ethernet Technology Guide
• Cabling Guide
• SmartTrunk User’s Guide
The manuals listed above can be obtained from the World Wide Web in Adobe Acrobat Portable
Document Format (PDF) at the following site:
http://www.enterasys.com/support/manuals/
NOTE: All documentation for the SecureFast VLAN Manager software is contained on
the VLAN Manager CD-ROM.