Installation guide

DFE Module Specifications
A-2 Specifications
7KR4290-02 Ports
Ports 1 and 2 Port interface option slots that support 10GBASE XENPAK
PHYs. Each port can support a full 10 Gbps throughput with a
maximum of 20 Gbps, when both ports are active at the same
time.
Processors/Memory
Processor IBM 750CXe, 600 MHz processor
Dynamic Random Access Memory
(DRAM)
256 MB
FLASH Memory 32 MB
Physical
Dimensions 46.43 H x 6.05 W x 29.51 D (cm)
18.28 H x 2.38 W x 11.62 D (in.)
Approximate Weight
7GR4270-12
7GR4202-30
7KR4290-02
Gross: 5.54 kg (12.0 lb) (shipping carton containing one module)
Net: 4.10 kg (9.0 lb) (one module without packaging)
Approximate Weight
7GR4280-19 Gross: 5.0 kg (11.0 lb) (shipping carton containing one module)
Net: 3.86 kg (8.5 lb) (one module without packaging)
Predicted hours for Mean Time
Between Failures (MTBF) for DFE
modules:
Refer to the MTBF web site at this URL:
http://www.enterasys.com/support/mtbf/
Environmental
Operating Temperature 5°C to 40°C (41°F to 104°F)
Storage Temperature -30°C to 73°C (-22°F to 164°F)
Operating Relative Humidity 5% to 90% (non-condensing)
Table A-1 Specifications (continued)
Item Specification