Installation guide

Matrix DFE-Diamond Series Installation Guide A-1
A
Specifications
Thisappendixprovidesinformationaboutthefollowing:
Enterasys Networksreservestherighttochangethespecificationsatanytimewithoutnotice.
DFE Module Specifications
Table A‐1providestheI/Oports,processorsandmemory,physical,andenvironmentalmodule
specificationsforthe7GR4270‐12,
7GR4202‐30,7GR4280‐19,and7KR4290‐02DFEmodules.
Unlessnoteddifferently,thespecificationsapplytoallfourDFEmodules.
For information about... Refer to page...
DFE Module Specifications A-1
Mini-GBIC Input/Output Specifications A-3
Gigabit Ethernet Specifications A-3
10GBASE XENPAK PHY Specifications A-6
COM Port Pinout Assignments A-7
Regulatory Compliance A-7
Table A-1 Specifications
Item Specification
7GR4270-12 Ports
Ports 1 through 12 Twelve fixed Mini-GBIC slots for up to twelve mix-and-match
1000BASE-SX and -LX compliant Mini-GBICs. Refer to
“Mini-GBIC Input/Output Specifications” on page A-3 for a list of
the supported Mini-GBICs.
7GR4202-30 Ports
Ports 1 through 30 Thirty, 10BASE-T/100BASE-TX/1000BASE-T compliant ports via
RJ45 connectors.
7GR4280-19 Ports
Ports 1 through 18 Mini-GBIC slots for up to 18 mix-and-match 1000BASE-SX, -LX,
-ELX and 1000BASE-T compliant Mini-GBICs. Refer to
“Mini-GBIC Input/Output Specifications” on page A-3.
Option Slot Supports one optional network expansion module.