Installation guide

Completing the Installation
3-26 Installation
Figure 3-18 Matrix DFE Startup Screen Example (N7 Chassis)
Completing the Installation of a DFE Module in an Existing System
InanestablishedDFEmodulesystem,
•aDFEmoduleisalreadyestablishedasthemanagementmodule,
•thepasswordshavealreadybeensetforvarioususers,
•thesystemIPaddressisset,and
•othersystemparametershavebeenset.
WhenyouinstallanewDFEmoduleintoasystemwithanexistingconfigureduser
account,the
currentsystemsettingsinthataccountarealreadyrecognizedbythenewDFEmoduleanditwill
operateaccordingly.
Ifyouneedtochangeanysettings,youcanconnectaterminaltothelocalconsoleportas
describedinConnectingtoCOMPortforLocalManagementonpage 3
20toaccesssystem
management,oruseaTelnetconnectiontoaccesstheDFEmodulesystemmanagementas
describedintheEnterasysMatrixDFEDiamond/PlatinumSeriesConfigurationGuide.
Logging in with an Administratively-Configured User Account
Ifthedevice’sdefaultuseraccountsettingshavebeenchanged,proceedasfollows:
1. Attheloginprompt,enteryouradministrativelyassignedusernameandpressENTER.
2. AtthePasswordprompt,enteryourpasswordandpressENTER.
ThenoticeofauthorizationandtheMatrixpromptdisplaysasshowninFigure 318onpage 3
26.
login: admin
Password:
M A T R I X N7
Command Line Interface
Enterasys Networks, Inc.
50 Minuteman Rd.
Andover, MA 01810-1008 U.S.A.
Phone: +1 978 684 1000
E-mail: support@enterasys.com
WWW: http://www.enterasys.com
(c) Copyright Enterasys Networks, Inc. 2003
Chassis Serial Number: xxxxxxxxxxxx
Chassis Firmware Revision: xx.xx.xx
Matrix N7(su)->
Note: Users with Read-Write (rw) and Read-Only (ro) access can use the set password
command to change their own passwords. Administrators with Super User (su) access can use
the set system login command to create and change user accounts, and the set password
command to change any local account password. For information on the set password and set
system login commands, refer to the Enterasys Matrix DFE-Diamond/Platinum Series
Configuration Guide
.