Specifications

CLI Tasks, Command Functions and Syntax
VRRP configuration mode
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-61
VLAN port
(clear)
Switch Resets the port’s 802.1Q port VLAN ID to the host VLAN ID 1. For
details, refer to Section 7.3.3.3.
clear port vlan port-string
VLAN port (set)
Switch Sets the port VLAN identifier (vlan_id) for one or more ports. For
details, refer to Section 7.3.3.2.
set port vlan port-string vlan_id
VLAN port
(show)
Switch Displays ports associated with a particular 802.1Q port VLAN ID.
For details, refer to Section 7.3.3.1.
show port vlan [port-string]
VLAN static
(show)
Switch Displays all information related to one or more static VLANs. For
details, refer to Section 7.3.1.2.
show vlan static [vlan_id | vlan_name]
VRRP (show)
Router Displays VRRP routing information. For details, refer to
Section 13.1.5.10.
show ip vrrp
VRRP address
Router Configures a virtual router IP address. For details, refer to
Section 13.1.5.3.
address vlan vlan_id vrid ip_address owner
VRRP advertise
interval
Router Sets the interval in seconds between VRRP advertisements. For
details, refer to Section 13.1.5.5.
advertise-interval vlan vlan_id vrid interval
VRRP
authentication
Router Sets a VRRP authentication password on an interface. For details,
refer to Section 13.1.5.9.
ip vrrp authentication-key password
VRRP
configuration
mode
Router Enables or disables VRRP configuration mode. For details, refer to
Section 13.1.5.1.
router vrrp
CLI Task Mode Command Function and Syntax