Specifications

CLI Tasks, Command Functions and Syntax
VLAN egress (clear)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-59
VLAN
classification
(set)
Switch Assigns VLANs according to VLAN classification rules, or filters
(drops) incoming frames according to protocol. For details, refer to
Section 7.3.5.2.
set vlan classification vlan_id data_meaning data_value
[data_mask] {create | enable | disable}
VLAN
classification
(show)
Switch Displays the VLAN ID (VID), protocol classification, and
description of each classification of the current entries. For details,
refer to Section 7.3.5.1.
show vlan classification
VLAN
classification
ingress (clear)
Switch Removes ports from a VLAN classification rule. For details, refer
to Section 7.3.5.7.
clear vlan classification ingress vlan_id port-string
data_meaning data _value [data_mask]
VLAN
classification
ingress (set)
Switch Adds ports to a VLAN classification rule. Ports added will now be
active for this rule. For details, refer to Section 7.3.5.6.
set vlan classification ingress vlan_id port-string
data_meaning data_value [data_mask]
VLAN dynamic
egress (set)
Switch Sets the administration status of the VLAN’s dynamic capability.
For details, refer to Section 7.3.4.6.
set vlan dynamicegress vlan_id {enable | disable}
VLAN dynamic
egress (show)
Switch Displays which VLANs are currently enabled for VLAN dynamic
egress. For details, refer to Section 7.3.4.5.
show vlan dynamicegress [vlan_id | vlan_name]
VLAN egress
(clear)
Switch Removes ports from a VLAN egress list. For details, refer to
Section 7.3.4.4.
clear vlan egress vlan-string port-string
CLI Task Mode Command Function and Syntax