Specifications

CLI Tasks, Command Functions and Syntax
Telnet (show)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-55
SSH server
Switch Configures a connection to an SSH server. For details, refer to
Section 14.3.6.3.
ssh ipaddr login [port]
system (show)
Switch Displays system information, including operating status, baud rate,
uptime, system name, location and contact name. For details, refer
to Section 3.2.2.2.
show system
system contact
(set)
Switch Sets a contact person for the system. For details, refer to
Section 3.2.2.12.
set system contact “contact_string”
system location
(set)
Switch Sets a location for the system. For details, refer to Section 3.2.2.11.
set system location “location_string”
system name
(set)
Switch Sets a name for the system. For details, refer to Section 3.2.2.10.
set system name “name_string”
system
resources
(show)
Switch Displays the CPU type, NVRAM installed and other resources
installed in the system. For details, refer to Section 3.2.2.1.
show system resources
Telnet (set)
Switch Enables or disables Telnet on the device when operating in switch
mode. For details, refer to Section 3.2.4.2.
set telnet {[disable | enable] inbound | outbound | all} | port
port | session {inbound | outbound | ssh}session}
Telnet (show)
Switch Displays the status of Telnet on the device when operating in switch
mode. For details, refer to Section 3.2.4.1.
show telnet
CLI Task Mode Command Function and Syntax