Specifications

CLI Tasks, Command Functions and Syntax
SSH ciphers (clear)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-53
Spanning Tree
topology
change trap
suppress
(show)
Switch Displays the status of topology change trap suppression on Rapid
Spanning Tree edge ports. For details, refer to Section 6.2.1.33.
show spantree tctrapsuppress
Spanning Tree
version (clear)
Switch Resets the Spanning Tree version to MSTP mode. For details, refer
to Section 6.2.1.5.
clear spantree version
Spanning Tree
version (set)
Switch Sets the version of the Spanning Tree protocol to RSTP (Rapid
Spanning Tree Protocol), MSTP (Multiple Spanning Tree Protocol)
or to STP 802.1D-compatible. For details, refer to Section 6.2.1.4.
set spantree version {rstp | mstp | stpcompatible}
Spanning Tree
version (show)
Switch Displays the current version of the Spanning Tree protocol running
on the device. For details, refer to Section 6.2.1.3.
show spantree version
speed (set port)
Switch Sets the default speed of an Ethernet port interface in Mbps. For
details, refer to Section 4.2.3.1.
set port speed port-string {10 | 100 | 1000}
SSH (set)
Switch Enables or disables Secure Shell (SSH) access. For details, refer to
Section 14.3.6.2.
set ssh {enable | disable}
SSH (show)
Switch Displays the current status and configuration of SSH on the device.
For details, refer to Section 14.3.6.1.
show ssh [ciphers] [config admin | oper] [mac] [sessions]
SSH ciphers
(clear)
Switch Clears one or more cipher names used for SSH encryption. For
details, refer to Section 14.3.6.5.
clear ssh ciphers {all | ciphername}
CLI Task Mode Command Function and Syntax