Specifications

CLI Tasks, Command Functions and Syntax
Spanning Tree secure span lock (show)
A-52 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Spanning Tree
secure span
lock (show)
Switch Displays the status of the Spanning Tree secure span function on
one or more ports. For details, refer to Section 6.2.2.20.
show spantree securespanlock port-string
Spanning Tree
secure span
timeout (clear)
Switch Resets the Spanning Tree secure span timeout to the default value
of 300 seconds. For details, refer to Section 6.2.2.19.
clear spantree securespantimeout
Spanning Tree
secure span
timeout (set)
Switch Sets the amount of time (in seconds) an edge port will remain
locked by the secure span function. For details, refer to
Section 6.2.2.18.
set spantree securespantimeout timeout
Spanning Tree
secure span
timeout (show)
Switch Displays the Spanning Tree secures span timeout setting. For
details, refer to Section 6.2.2.17.
show spantree securespantimeout
Spanning Tree
transmit hold
count (set)
Switch Sets the maximum transmit hold count on a Spanning Tree. This is
the number of BPDUs which will be transmitted before
transmissions are subject to a one-second timer. For details, refer to
Section 6.2.1.37.
set spantree txholdcount txholdcount
Spanning Tree
transmit hold
count (show)
Switch Displays the maximum BPDU transmission rate. For details, refer
to Section 6.2.1.36.
show spantree txholdcount
Spanning Tree
topology
change trap
suppress (set)
Switch Disables or enables topology change trap suppression on Rapid
Spanning Tree edge ports. When enabled, this prevents edge ports
from sending topology change traps. For details, refer to
Section 6.2.1.34.
set spantree tctrapsuppress {disable | enable}
CLI Task Mode Command Function and Syntax