Specifications

CLI Tasks, Command Functions and Syntax
Spanning Tree secure span lock (clear)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-51
Spanning Tree
port priority
(set)
Switch Sets a port’s priority for use in the Spanning Tree algorithm (STA).
For details, refer to Section 6.2.2.6.
set spantree portpri port-string priority [sid]
Spanning Tree
port priority
(show)
Switch Displays the Spanning Tree priority for one or more ports. For
details, refer to Section 6.2.2.5.
show spantree portpri port-string [sid]
Spanning Tree
priority (clear)
Switch Resets the bridge priority to the default value of 32768. For details,
refer to Section 6.2.1.17.
clear spantree priority [sid]
Spanning Tree
priority (set)
Switch Sets the device’s Spanning Tree priority. The lower the numeric
value, the higher the device priority. For details, refer to
Section 6.2.1.16.
set spantree priority bridge_priority [sid]
Spanning Tree
secure span
(clear)
Switch Resets the status of the Spanning Tree secure span function to
disabled. For details, refer to Section 6.2.2.16.
clear spantree securespan
Spanning Tree
secure span
(set)
Switch Enables or disables the Spanning Tree secure span function. When
enabled, this prevents an unauthorized bridge from becoming part
of the active Spanning Tree topology. For details, refer to
Section 6.2.2.15.
set spantree securespan {enable | disable}
Spanning Tree
secure span
(show)
Switch Displays the status of the Spanning Tree secure span function. For
details, refer to Section 6.2.2.17.
show spantree securespan
Spanning Tree
secure span
lock (clear)
Switch Unlocks one or more ports locked by the Spanning Tree secure span
function. For details, refer to Section 6.2.2.21.
clear spantree securespanlock [port-string]
CLI Task Mode Command Function and Syntax