Specifications

CLI Tasks, Command Functions and Syntax
Spanning Tree point-to-point (show)
A-50 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Spanning Tree
point-to-point
(show)
Switch Displays the administrative point-to-point status of the LAN
segment attached to a port. For details, refer to Section 6.2.2.22.
show spantree adminpoint port-string
Spanning Tree
port admin
(clear)
Switch Resets the default Spanning Tree admin status to enable on one or
more ports. For details, refer to Section 6.2.2.3.
clear spantree portadmin [port-string]
Spanning Tree
port admin (set)
Switch Enables or disables the Spanning Tree algorithm (STA) on one or
more ports. For details, refer to Section 6.2.2.2.
set spantree portadmin port-string {enable | disable}
Spanning Tree
port admin
(show)
Switch Displays the status of the Spanning Tree algorithm on one or more
ports. For details, refer to Section 6.2.2.1.
show spantree portadmin port-string
Spanning Tree
port cost
(clear)
Switch Resets path cost for a Spanning Tree or port to the default value of
0, allowing for path cost to be determined dynamically based on
port speed. For details, refer to Section 6.2.2.10.
clear spantree portcost [port-string] [sid]
Spanning Tree
port cost
(set)
Switch Assigns a cost value to a Spanning Tree port. This parameter is used
to determine the best path between Spanning Tree devices. For
details, refer to Section 6.2.2.9.
set spantree portcost port-string cost [sid]
Spanning Tree
port cost
(show)
Switch Displays cost values assigned to one or more Spanning Tree ports.
For details, refer to Section 6.2.2.8.
show spantree portcost port-string [sid]
Spanning Tree
port priority
(clear)
Switch Resets the bridge priority of a Spanning Tree port to a default value
of 128. For details, refer to Section 6.2.2.7.
clear spantree portpri [port-string] [sid]
CLI Task Mode Command Function and Syntax