Specifications

CLI Tasks, Command Functions and Syntax
Spanning Tree legacy path cost (clear)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-47
Spanning Tree
hello (clear)
Switch Resets the bridge hello time for a Spanning Tree to a default value
of 2 seconds. For details, refer to Section 6.2.1.22.
clear spantree hello [port-string]
Spanning Tree
hello (set)
Switch Sets the bridge hello time for a Spanning Tree. This is the time
interval (in seconds) at which the root device transmits a
configuration message. For details, refer to Section 6.2.1.21.
set spantree hello interval [port-string]
Spanning Tree
hello mode
(clear)
Switch Resets the Spanning Tree adminstrative hello mode to enabled. For
details, refer to Section 6.2.1.20.
clear spantree bridgehellomode
Spanning Tree
hello mode (set)
Switch Sets whether to use a single bridge administrative hello time
(enable) or per-port administrative hello times (disable.) For
details, refer to Section 6.2.1.19.
set spantree bridgehellomode {enable | disable}
Spanning Tree
hello mode
(show)
Switch Displays whether a single bridge administrative hello time is being
used (enabled) or whether per-port administrative hello times are
being used (disabled.) For details, refer to Section 6.2.1.18.
show spantree bridgehellomode
Spanning Tree
hop count
(clear)
Switch Resets the maximum hop count to the default value of 20. For
details, refer to Section 6.2.1.40.
clear spantree maxhops
Spanning Tree
hop count (set)
Switch Sets the Spanning Tree maximum hop count. For details, refer to
Section 6.2.1.39.
set spantree maxhops max_hop_count
Spanning Tree
legacy path
cost (clear)
Switch Resets path cost to 802.1d values. For details, refer to
Section 6.2.1.32.
clear spantree legacypathcost
CLI Task Mode Command Function and Syntax