Specifications

CLI Tasks, Command Functions and Syntax
Spanning Tree blocked ports (show)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-45
SNTP poll
interval (set)
Switch Sets the SNTP poll interval in seconds. This is the time between
SNTP requests. For details, refer to Section 11.2.4.4.
set sntp poll-interval time
SNTP server
(clear)
Switch Removes one or all servers from the SNTP server list. For details,
refer to Section 11.2.4.6.
clear sntp server {all [ip-address | hostname]}
SNTP server
(set)
Switch Adds a server to the SNTP server list. For details, refer to
Section 11.2.4.5.
set sntp server {ip-address | hostname}
SNTP time zone
(clear)
Switch Removes SNTP time zone adjustment values. For details, refer to
Section 11.2.4.8.
clear timezone
SNTP time zone
(set)
Switch Sets the SNTP time zone name and hours and minutes offset from
GMT. For details, refer to Section 11.2.4.7.
set timezone name [hours] [minutes]
SNTP (show)
Switch Displays SNTP settings. For details, refer to Section 11.2.4.1.
show sntp
Spanning Tree
(set)
Switch Globally enables or disables the Spanning Tree algorithm on the
switch. For details, refer to Section 6.2.1.2.
set spantree {disable | enable}
Spanning Tree
(show)
Switch Displays Spanning Tree information. For details, refer to
Section 6.2.1.1.
show spantree stats [sid sid] [port port-string]
Spanning Tree
blocked ports
(show)
Switch Displays Spanning Tree blocked ports. For details, refer to
Section 6.2.2.4.
show spantree blockedports [sid]
CLI Task Mode Command Function and Syntax