Specifications

CLI Tasks, Command Functions and Syntax
SNMP user (clear)
A-44 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
SNMP user
(clear)
Switch Removes a user from the SNMPv3 security-model list. For details,
refer to Section 5.2.2.3.
clear snmp user user [remote remote]
SNMP user (set)
Switch Creates a new SNMPv3 user. For details, refer to Section 5.2.2.2.
set snmp user user [authentication {md5 authpassword
[privacy privpassword]][remote remote] [{volatile |
nonvolatile}]
SNMP user
(show)
Switch Displays a summary of the SNMPv3 user configuration. For
details, refer to Section 5.2.2.4.
show snmp user [user] | [remote remote]
SNMP view
(clear)
Switch Deletes an SNMP MIB view. For details, refer to Section 5.2.4.3.
clear snmp view viewname subtree subtree
SNMP view (set)
Switch Sets the SNMP MIB view configuration. For details, refer to
Section 5.2.4.2.
set snmp view viewname subtree subtree [included | excluded]
[volatile | nonvolatile]
SNMP view
(show)
Switch Displays the SNMP MIB view configuration (for VACM). For
details, refer to Section 5.2.4.1.
show snmp view [viewname] [subtree oid]
SNTP broadcast
delay (set)
Switch Sets the SNTP time to wait for a response from an SNTP server, in
milliseconds, when in broadcast mode. For details, refer to
Section 11.2.4.3.
set sntp broadcastdelay time
SNTP client
(set)
Switch Sets the SNTP operation mode. For details, refer to
Section 11.2.4.2.
set sntp client {broadcast | unicast | disable}
CLI Task Mode Command Function and Syntax