Specifications

General Configuration Command Set
Setting Basic Device Properties
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 3-43
3.2.2.11 set system location
Use this command to identify the location of the system.
set system location “location_string”
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the system location string:
location_string Specifies a text string that indicates where the system is
located. A location string containing a space in the text
must be enclosed in quotes as shown in the example
below.
Matrix>set system location “Bldg N32-04 Closet 9 Alpha Sierra”