Specifications

CLI Tasks, Command Functions and Syntax
SNMP access (set)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-39
router (enable)
Router Enables router mode (Privileged EXEC) from switch mode. For
more details, refer to Section 3.3.3.
router
router ID (set)
Router Sets the IP address that will be used as the OSPF router ID. For
details, refer to Section 13.1.2.3.
router id ip_address
routing
(disable)
Router Disables IP routing on the device and removes the routing
configuration. For details, refer to Section 12.2.2.3.
no ip routing
screen (clear)
Switch Clears the screen for the current CLI session. For details, refer to
Section 3.2.7.2.
cls
SNMP (set)
Switch Enables or disables SNMP management. For details, refer to
Section 5.2.1.2.
set snmp {enable | disable}
SNMP (show)
Switch Displays the status of SNMP management. For details, refer to
Section 5.2.1.1.
show snmp
SNMP access
(clear)
Switch Clears the SNMP access entry of a specific group, including its set
SNMP security-model, and level of security. For details, refer to
Section 5.2.3.3.
clear snmp access groupname security-model {v1 | v2 | v3
{noauth | auth | authpriv}}
SNMP access
(set)
Switch Sets an SNMP access configuration. For details, refer to
Section 5.2.3.2.
set snmp access groupname security-model {v1 | v2 | v3
{noauth | auth | authpriv}} [read read] [write write] [notify
notify] [volatile | nonvolatile]
CLI Task Mode Command Function and Syntax