Specifications

CLI Tasks, Command Functions and Syntax
RIP receive interface
A-38 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
RIP receive
interface
Router Allows RIP to receive update packets on an interface. For details,
refer to Section 13.1.1.20.
receive-interface vlan vlan_id
RIP receive
version
Router Sets the RIP version(s) for update packets accepted on an interface.
For details, refer to Section 13.1.1.8.
ip rip receive version {1 | 2 | 1 2 | none}
RIP rediistribute
Allows routing information discovered through non-RIP protocols
to be distributed in RIP update messages. For details, refer to
Section 13.1.1.22.
redistribute {connected | ospf process_id | static} [metric
metric value] [subnets]
RIP send
version
Router Sets the RIP version for update packets transmitted on an interface.
For details, refer to Section 13.1.1.7.
ip rip send version {1 | 2 | r1compatible}
RIP split
horizon
Router Enables or disables split horizon mode for RIP packets. Split
horizon prevents packets from exiting through the same interface on
which they were received. For details, refer to Section 13.1.1.18.
ip split-horizon [poison]
RIP timers
Router Adjusts RIP routing timers. For details, refer to Section 13.1.1.6.
timers basic update_seconds invalid_seconds
holdown_seconds flush_seconds
RIP triggered
updates
(disable)
Router Prevents RIP from sending triggered updates. For details, refer to
Section 13.1.1.17.
ip rip disable-triggered-updates
RMON stats
(show)
Switch Displays RMON (Remote Monitoring) statistics for one or more
ports. For details, refer to Section 11.2.2.8.
show rmon stats [port-string]
CLI Task Mode Command Function and Syntax