Specifications

CLI Tasks, Command Functions and Syntax
RIP passive interface
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-37
RIP automatic
route
summarization
(disable)
Router Disables automatic route summarization. This enables CIDR,
allowing RIP to advertise all subnets and host routing information
on the device. For details, refer to Section 13.1.1.16.
no auto-summary
RIP
configuration
mode
Router Enables or disables RIP router configuration mode. For details,
refer to Section 13.1.1.1.
router rip
RIP distance
Router Sets an administrative distance for RIP routes. For details, refer to
Section 13.1.1.4.
distance weight
RIP distribute
list
Router Filters networks received and suppresses networks from being
advertised in RIP updates. For details, refer to Section 13.1.1.21.
distribute-list access-list-number {in vlan vlan_id | out vlan
vlan_id}
RIP neighbor
Router Instructs the router to send unicast RIP information to a specific IP
address. For details, refer to Section 13.1.1.3.
neighbor ip_address
RIP network
Router Attaches a network to or removes a network from a RIP routing
process. For details, refer to Section 13.1.1.2.
network ip_address
RIP offset
Router Adds or removes an offset to the metric of an incoming or outgoing
RIP route. This is used for making an interface a backup. For
details, refer to Section 13.1.1.5.
ip rip offset {in | out} value
RIP passive
interface
Router Prevents RIP from transmitting update packets on an interface. For
details, refer to Section 13.1.1.19.
passive-interface vlan vlan_id
CLI Task Mode Command Function and Syntax