Specifications

CLI Tasks, Command Functions and Syntax
reset (at a future time)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-35
RADIUS
accounting (set)
Switch Configures RADIUS accounting. For details, refer to
Section 14.3.1.5.
set radius accounting {[enable] [disable] [server index ip_address
port server-secret]
[retries retries index] [timeout timeout index]
[intervalminimum value] [updateinterval value]}
RADIUS
accounting
(show)
Switch Displays the RADIUS accounting configuration. For details, refer
to Section 14.3.1.4.
show radius accounting [server [index] | counter [index] |
retries [index] | timeout [index] | intervalminimum |
updateinterval]
rate limit (clear
port)
Switch Resets rate limiting for one or more ports. For details, refer to
Section 9.3.6.3.
clear port ratelimit port-string {index | all}
rate limit (set
port)
Switch Sets the traffic rate limiting status and threshold (in bits per second)
for one or more ports. For details, refer to Section 9.3.6.2.
set port ratelimit {disable | enable port-string priority
threshold {discard | marked} {disable | enable} }
rate limit (show
port)
Switch Displays the current traffic rate limiting configuration on one or
more ports. For details, refer to Section 9.3.6.1.
show port ratelimit [port-string]
repeat
Switch Repeats a command listed in the command history buffer. For
details, refer to Section 11.2.2.4.
repeat [cmd_num] [iterations]
reset
Switch Resets the device immediately or cancels or displays information
about a scheduled reset. For details, refer to Section 3.2.8.2.
reset [system [cancel]] [show]
reset (at a
future time)
Switch Schedules a system reset at a specific future time. For details, refer
to Section 3.2.8.3.
reset at hh:mm [mm/dd] [reason reason]
CLI Task Mode Command Function and Syntax