Specifications

CLI Tasks, Command Functions and Syntax
QoS weighted round robin (set port)
A-34 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
QoS weighted
round robin (set
port)
Switch Sets the weighted round robin transmission queues for one or more
ports. For details, refer to Section 9.3.3.3.
set port qos wrr port-string que0_weight que1_weight
que2_weight que3_weight
RAD (set)
Switch Enables or disables RAD (Runtime Address Discovery) protocol.
For details, refer to Section 11.2.3.5.
set rad {enable | disable}
RAD (show)
Switch Displays the status of RAD (Runtime Address Discovery) protocol
on the switch. For details, refer to Section 11.2.3.4.
show rad
RADIUS (clear)
Switch Resets the RADIUS server to default values. For details, refer to
Section 14.3.1.3.
clear radius {[last-resort-action [local | remote]] [retries]
[server {index | all}] [timeout]}
RADIUS (set)
Switch Enables, disables, or configures RADIUS authentication. For
details, refer to Section 14.3.1.2.
set radius {enable | disable | last-resort-action {local {accept |
reject
| challenge} | remote {accept | reject | challenge}} | retries
number-of-retries
| server index ip_address port server-secret |
timeout timeout-value
| mgmt-auth {enable | disable}}
RADIUS (show)
Switch Displays the current RADIUS client/server configuration. For
details, refer to Section 14.3.1.1.
show radius [last-resort-action] [retries] [server [index]]
[timeout]
RADIUS
accounting
(clear)
Switch Resets the RADIUS accounting configuration to default values. For
details, refer to Section 14.3.1.6.
clear radius accounting {[server{index | all}] [counter{index
| all}] [retries { index | all}] [timeout {index | all}]
[intervalminimum] [updateinterval]}
CLI Task Mode Command Function and Syntax