Specifications

CLI Tasks, Command Functions and Syntax
QoS strict priority (set port)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-33
priority
classification
TOS value (set)
Switch Sets the ToS (Type of Service) value. This value identifies packets
which should have preferential treatment on a Class of Service
(CoS) basis. For details, refer to Section 9.3.4.5.
set priority classification tosvalue tos_value priority_value
data_meaning data_value [data_mask]
priority queue
(set)
Switch Maps 802.1p priorities to transmit queues. For details, refer to
Section 9.3.2.2.
set priority queue priority queue
priority queue
(show)
Switch Displays port priority levels associated with the current transmit
port priority queue for each priority. For details, refer to
Section 9.3.2.1.
show priority queue [priority]
prompt (set)
Switch Modifies the command prompt. For details, refer to Section 3.2.2.5.
set prompt “prompt_string”
protocols (show
IP)
Router Displays information about IP protocols running on the device. For
details, refer to Section 12.2.5.1.
show ip protocol
QoS hybrid (set
port)
Switch Sets the hybrid function and the percentage of port transmission
capacity according to transmit queues. For details, refer to
Section 9.3.3.4.
set port qos hybrid hybrid_setting port-string que1_weight
que2_weight que3_weight
QoS (show port)
Switch Displays Quality of Service information, including the current QoS
algorithm and associated queue settings, for one or more ports. For
details, refer to Section 9.3.3.1.
show port qos [port-string]
QoS strict
priority (set
port)
Switch Enables strict 802.1 traffic queueing on one or more ports. For
details, refer to Section 9.3.3.2.
set port qos sp [port-string]
CLI Task Mode Command Function and Syntax