Specifications

CLI Tasks, Command Functions and Syntax
priority classification (clear)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-31
port web
authentication
initialize
Switch Initializes a port to its default port web authentication state. For
details, refer to Section 14.3.5.12.
set pwa initialize [port-string]
port web
authentication
IP address
Switch Sets the Secure Harbor IP address. For details, refer to
Section 14.3.5.6.
set pwa ipaddress ip-address
port web
authentication
maximum
requests
Switch Sets the maximum number of Secure Harbor log on attempts
allowed before transitioning the PWA port to a held state. For
details, refer to Section 14.3.5.14.
set pwa maxrequests requests [port-string]
port web
authentication
name services
Switch Enables or disables Domain Name Service (DNS) and Windows
Internet Naming Services (WINS) spoofing. For details, refer to
Section 14.3.5.5.
set pwa nameservices {enable | disable}
port web
authentication
port control
Switch Sets the port web authentication port control mode. For details, refer
to Section 14.3.5.15.
set pwa portcontrol {auto | forceauthorized |
forceunauthorized | promiscuousauto} [port-string]
port web
authentication
protocol
Switch Sets the port web authentication protocol. For details, refer to
Section 14.3.5.7.
set pwa protocol {chap | pap}
port web
authentication
quiet period
Switch Sets the amount of time a port will be in the held state after a user
unsuccessfully attempts to log on. For details, refer to
Section 14.3.5.13.
set pwa quietperiod time [port-string]
priority
classification
(clear)
Switch Clears priority classification entries. For details, refer to
Section 9.3.4.4.
clear priority classification priority_value data_meaning
data_value [data_mask]
CLI Task Mode Command Function and Syntax