Specifications

CLI Tasks, Command Functions and Syntax
port status (show)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-29
port buffer
threshold (show
HOLBP)
Switch Displays Head of the Line Blocking Prevention settings for one or
more ports.For details, refer to Section 4.2.6.5.
show port holbp port-string {ingress | egress}
port disable
Switch Disables one or more ports. For details, refer to Section 4.2.2.1.
set port disable port-string
port enable
Switch Enables one or more ports. For details, refer to Section 4.2.2.2.
set port enable port-string
port ingress
filter
(set)
Switch Limits the forwarding of received VLAN tagged frames on a port to
the frames with VLAN IDs that match that port’s membership on
port VLAN egress lists. For details, refer to Section 7.3.3.5.
set port ingress filter port-string {enable | disable}
port ingress
filter
(show)
Switch Displays ports enabled for port ingress filtering. For details, refer to
Section 7.3.3.4.
show port ingress filter [port-string]
port priority
(clear)
Switch Resets the current 802.1D port priority setting to 0. For details, refer
to Section 9.3.1.3.
clear port priority port-string
port priority
(set)
Switch Sets the transmit queues (port priority queues, 0 through 7). For
details, refer to Section 9.3.1.2.
set port priority port-string priority
port priority
(show)
Switch Displays the port priority setting for one or more ports. For details,
refer to Section 9.3.1.1.
show port priority [port-string]
port status
(show)
Switch Displays port administrative (operating) status, duplex mode, speed
and port type, and statistical information about traffic received and
transmitted through one or more ports on the device. For details,
refer to Section 4.2.1.1.
show port status [port-string]
CLI Task Mode Command Function and Syntax